Instructions For Installation - Gastro BER443ECO Instalacion Uso Mantenimiento

MEANS NECESSARY FOR HANDLING
The equipment can be lifted and moved with a
forklift, crane, cranes or other appropriate means
having an adequate capacity.
Check the alignment of the forks and the stability
of the load before moving the equipment.
For handling Always follow the following rules:
- Slowly moved the equipment.
- Do not tilt the device but always keep it upright.
- Be sure to always check the equipment during
handling.
IMPORTANT !
Do not spill the equipment.
Not carry the equipment.
Not cause jolts equipment.
STORAGE EQUIPMENT
And 'advisable for the storage environment is dry
with temperatures ranging from 0 ° C to 40 ° C.
Do not stack more than the equipment packed
indication on the packaging and keep the vertical
position indicated by the arrows marked on the
packaging itself.
Make sure that the forks do not hit the frame of
the equipment. In the event of accidental damage
immediately controlled, if necessary contact the
manufacturer.
DISPOSAL OF PACKING AND OF THE
APPLIANCE
PACKING
The packing is made using environmentally
friendly materials.The
components are:
- the transparent cover, the bags containing the
instructions manual and nozzles (made of
Polyethylene - PE ).
- the straps (in Polypropylene - PP).
APPLIANCE
plastic recyclable
The appliance is manufactured 90% from
recyclable metals (stainless steel, aluminium
sheet, copper....).
The appliance must be scrapped in compliance
with current regulations governing such disposal.
Make the appliance unusable before scrapping.
It must be disposed of properly.
SAFETY AND CONTROL DEVICES
Safety thermostat
The manufacturer will not be liable
for any damage or injury resulting
from failure
following rules.
The appliance is equipped with a manual reset
safety thermostat that interrupts heating when
the operating temperature exceeds the maximum
permitted value.
To restore appliance operation press the
thermostat reset button. This procedure must
only be carried out by a qualified, authorized
technician.
2. INSTRUCTIONS FOR
INSTALLATION
REMINDERS FOR THE INSTALLER
Read this
provides important information for
safe
maintenance of the appliance.
The manufacturer will not be liable
for any damage or injury resulting
from failure
following rules.
Identify the specific appliance model. The model
number is detailed on the packing and on the
appliance dataplate.
The appliance must be installed in a well-
ventilated room.
Do not obstruct any air vents or drains present on
the appliance.
11
to observing
manual carefully.
installation, use
to observing
the
It
and
the