Wolf DD30 Guia De Instalacion página 11

Installation
Installation
IN-LINE / REMOTE BLOWER
1 Insert the electrical supply (Romex
remote blower through the opening on the downdraft
and secure using an approved cord strain relief.
Connect hot to brown, neutral to blue, and ground to
2
green. Refer to the illustrations below.
WIRING
COVER
Wiring location
®
) from the in-line or
FROM
BLOWER NEUTRAL
HOT TO POWER
CORD
GROUND
RECEPTACLE
BLUE
BROWN
In-line/remote blower wiring
COUNTERTOP MOUNTING
Place the downdraft in the opening, then secure the
bottom brackets to the cabinet base using the wood
screws provided. Once the brackets are secure, tighten
the existing lower bracket screws. Refer to the illustration
below.
Secure the top mounting brackets to the countertop using
the wood screws provided. For solid surface countertops,
silicone may be used but is not provided.
Once the top is secure, install the undercounter brackets
using the screws provided, then install the side covers.
Refer to the illustration below.
MOUNTING
SCREW
Countertop mounting
COVER
Cover installation
wolfappliance.com | 11