Protecting The Environment; Ec Declaration Of Conformity - Black+Decker BDCJS12 Manual De Instrucciones

Sawing metal
Be aware that sawing metal takes much more time than
sawing wood.
Use a saw blade suitable for sawing metal. Use a finetooth
u
saw blade for ferrous metals and a coarser saw
blade for non-ferrous metals.
When cutting thin sheet metal, clamp a piece of scrap
u
wood to the back surface of the workpiece and cut through
this sandwich.
Spread a film of oil along the intended line of cut.
u
Accessories
The performance of your tool depends on the accessory used.
BLACK+DECKER accessories are engineered to high quality
standards and designed to enhance the performance of your
tool. By using these accessories you will get the very best
from your tool.
This tool is suitable both for U-shank and T-shank saw blades
Maintenance
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
Regularly clean the ventilation slots in your tool and
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
Regularly tap bit holder to remove any dust from the
u
interior.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste..
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
Voltage
No-load speed
Stroke Length
Max depth of cut:
Wood
Steel
Aluminium
Weight
Battery (Not supplied)
Voltage
Capacity
Type
Charger
Input voltage
Output voltage
Output current
Approx. charge time
Hours
Level of sound pressure according to EN 62841:
Sound pressure (L ) 79,6 dB(A), uncertainty (K) 5 dB(A)
pA
Sound power (L ) 90,6 dB(A), uncertainty (K) 5 dB(A)
WA
Vibration total values (triax vector sum) according to EN 62841:
Cutting chipboard (a ) 5,2 m/s
h, B
Cutting sheet metal (a ) 6,1 m/s
h, M

EC declaration of conformity

MACHINERY DIRECTIVE
BDCJS12 Jigsaw
Black & Decker declares that these products described under
"technical data" are in compliance with:
EN62841-1:2015 , EN62841-2-11:2016.
These products also comply with directive
2006/42/EC, 2014/30/EU and 2011/65/EU
V
DC
Min
-1
mm
mm
mm
mm
kg 1.19 (with battery 1.44)
V
DC
Ah
V
AC
V
DC
A
, uncertainty (K) 1,5 m/s
2 2
, uncertainty (K) 1,5 m/s
2 2
%
BDCJS12
12
0 - 2800 SPM
16
52
5
17
BDCB12
12
1.5
Li-Ion
100-240V
5V
1
1.5