Product Safety Information; Product Specifications; Installation And Lubrication; Parts And Maintenance - Ingersoll Rand 371 Especificaciones Del Producto

Product Safety Information

Intended Use:
These tools are designed to install or remove threaded fasteners.
For Additional information refer to Air Screwdriver Product Safety Information Manual
Form 04585006.
Manuals can be downloaded from www.ingersollrandproducts.com

Product Specifications

Type of
Model
Handle
371 Pistol
LA412 Pistol
LA413 In-Line
LA439 Pistol
* tested in accordance with ISO 15744
† K = 3dB measurement uncertanity
pA

Installation and Lubrication

Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install
a properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any
hose coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 16578346 and table on page 2. Maintenance frequency is shown in a
circular arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter

Parts and Maintenance

When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
80160179_ed3
Free
Drive
Speed
(inch)
(RPM)
1/4 1800
1/4 1800
1/4 1800
1/4 1800
Sound Level dB(A)
(ANSI S5.1-1971)
† Pressure (L ) ‡ Power (L
p
* 91.0 * 102.0
Power
Pressure
(ISO 3744)
89.6 102.6
88.5 101.5
89.9 102.9
‡ K = 3dB measurement uncertanity
wA
6. Thread size
7. Coupling
8. Safety Air Fuse
9. Oil
10. Grease - during assembly
EN
Vibration
Level
(ISO28927)
) m/s
2
w
< 2.5
< 2.5
< 2.5
< 2.5
EN-1