G10078; Control Panel; First Use - TREVIDEA G10078 Manual Del Usuario

- To prevent electrical shock, do not immerse power cord, plug or the body in water or other liquid.
- Do not touch moving or rotating parts of the unit. Disconnect the plug from the outlet when the
appliance is not in use, before putting on or taking off accessories and before cleaning.
- The use of attachments not recommended by the manufacturer may cause damages or injuries
which are not covered by the warranty.
- Do not place the appliance over or near the gas/electric stove, or near a hot oven.
- Never operate the unit without the tray properly inserted and filled with the ingredients.
- Never knock the pan on the top or on the board, since this may cause serious damages.
- Metal sheets or other materials, utensils and cutlery should not be inserted in the bread machine,
this may increase the risk of fire or electrical shock.
WARNING! Never cover the unit while it is running, this may cause RISK OF BURNS.
- Operate the device only as intended in this owner's guide.
- Do not use outdoors. Indoor use only.
- Unit is not designed to be operated by means of an external timer or via a remote control system.
- Before cleaning or maintenance, it is necessary to wait for the unit to completely cool down. Do
not insert anything in the ventilation windows.
- Use original spare parts and accessories only.
- Never leave the appliance unattended while it is running. Remove the plug after each use.
- Do not use the appliance as a heating unit.
CAUTION: Before starting any cleaning or maintenance, switch off the unit and unplug
the power cord from the mains socket.
CAUTION: kneading blade can remain in the bread after cooking. Control if the blade is
stuck in the bread after every cooking, and eventually use the hook (7) to take it out.
DESCRIPTION G10078
1. Glass window
2. Cover
3. Kneading blade
4. Bread pan
5.

Control panel

6. Housing
7. Hook
CONTROL PANEL (5)

FIRST USE

The appliance may emit a little 'smoke
and a characteristic smell when you
turn it on for the first time. This is
normal and will soon finish.
1. Place unit on a flat and stable surface and make sure it has adequate ventilation on both sides.
2. Ensure that all parts and accessories are intact and free of damage.
3. Clean all the parts as shown in the "Cleaning and Maintenance".
4. Set the bread machine in "Baking" (Function 19) and make it run for about 10 minutes. When
completely cooled, wipe the system again.
5. Dry all the parts and reassemble them properly: the machine is now ready for use.
8. Measuring cup
9. Measuring spoon
17