Tabla de contenido
Assembly Instructions
Fig. 30
[PF 3888] 1'' x 4'' x 47-1/2''
[PF 3888] 1'' x 4'' x 47-1/2''
1-1/4'' Lag Screw
Monkeybar
ssembly:
1. Laminate Monkey Bar Ladder Uprights as shown in (Fig. 30).
2. Measure and place Monkey Bar Step Brackets and Boomerang Bracket on upright as shown in (Fig. 30a).
Pre-Drill Note: To prevent wood from splitting, pre-drill the (3) holes for the 1-1/4'' Lag Screws. Use a 1/8'' drill
bit & drill to a maximum depth of 1-1/4''.
3. Reverse dimensions for the brackets on the opposite leg and repeat step 2.
x2
[PF 3877] 1'' x 4'' x 23-3/4''
(20)
1-1/4''
screws
per side
[PF 3888] 1'' x 4'' x 47-1/2''
[PF 3877] 1'' x 4'' x 23-3/4''
Pre-Drill
47-1/2''
36-1/4''
25-1/8''
40
Fig. 30a
10-1/4''
FLUSH
(3)
1-1/4''
Lag screws
per bracket
(3)
1-1/4''
screws
per bracket
45-1/4''
34-1/8''
23''
1-1/4'' Wood Screw
Tabla de contenido
