Tabla de contenido
Assembly Instructions
TIMbERGlOVE APPlIcATION
step 1
4'' x 4''
TimberGlove
TimberGlove application Step One
1. Layout your 4'' x 4'' on top of one rolled out and flattened TimberGlove.
step 2
4'' x 4''
TimberGlove
TimberGlove application Step Two
2. Pull Timber Glove snug around 4'' x 4'' starting at one end and continuing to the other.
step 3
TimberGlove application Step Three
3. Start at beginning and pull Timber Glove tight over 4'' x 4'' from one end to the other.
step 4
TimberGlove application Step Four
4. Install (1) 1-1/4'' screw through the Hook and Loop seam every 12'' along 4'' x 4''.
Note: Do not sink 1-1/4'' screw head through TimberGlove fabric. Doing so can cause TimberGlove to become
loose over time. Make Screw Head flush with surface of TimberGlove.
11
Tabla de contenido
