Software - Steren MUL-630 Manual De Instrucciones

SOFTWARE

1. Insert the cd in your computer. It contains two folders: "drivers" and "software".
2. Open the "drivers" folder and run the program "USB_DriverInstaller_v1.7.0.exe". This will
install the meter drivers.
3 Go to the "software" folder and run the "setup.exe" program.
4. On the meter, press and hold the REL button for 2 seconds. PC-LINK will be displayed on
the screen.
5. Connect the optical end of the communication cable to the meter and the other end to a
USB port on your computer.
6. Run the program "PC-LINK" (on the PC).
7. Select the sampling rate in the "Set" menu and press "Apply".
8. To begin the readings, use the "Start" button.
9. Press "Stop" to stop and "Reset" to clear the displayed readings.
10. In the "File menu", select "Save" to export the data displayed one Excel (.xls) or text (.txt)
document.
If you do not obtain data from the meter, run the software as administrator.
The multitester driver does not work on 64-bit systems.
17