Software Update; Led Chart - Powersoft X Serie Manual De Instrucciones

Software update

Powersoft X Series amplifier platforms embed a complete
digital audio signal management system based on ARM Cortex
A-8 processor and TI C6000 DSP platform. This impressive on-
board computing capacity is driven by a dedicated software
environment.
Updated releases of the X Series software are available on the
Armonía forum (https://armonia.powersoft.it/).
The package contains the software update file whose name
is in the form:
update-version#-model.bin
(e.g. update-v1.5.0.6-x4.bin); in order to update the software of
your X Series amplifier platform you must store the software up-
date file into a USB key and follow these instructions:
1. Switch the amplifier on and wait for the completion of the
boot sequence.
2. Plug the USB key with the software update file to the USB
port in the front panel of the amplifier.
3. Keep pressed the rightmost pushbutton (Armonía callback)
until the second beep is emitted and the LEDs start blinking.
...
USB Key in
Blinking
4. Wait until the amplifier restarts and all front LEDs turn solid
blue.
22 | X Series
6

LED chart

All circular back illuminated buttons provide status informa-
tion. The CENTER of each channel button provides status informa-
tion about the OUTPUT signal.
Center color
OUTPUT indicators
color
blue
yellow
The RING of each channel button provides status information
about the INPUT signal.
color
white
blinking
(center blue)
red
Channel fault and Armonía callback are associated to the fol-
lowing LED signals.
color
(center and ring)
blinking / all channels
(center and ring)
The central button light on when the system is in standby
mode or in case of failure in the power supply unit:
color
white
pulsing
(all LEDs off)
red
pulsing
(normal operating)
color
red
blinking
yellow
blinking
Center color
OUTPUT indicators
status color
Channel
orange
ready
Limiter orange
active blinking
Ring color
INPUT indicators
status
Input signal presence
Input signal clipping
status
red blinking
Channel fault
Unit answering to
Armonía callback
Ring color
CENTRAL button
status
System powered
Standby mode
fan fault detected
(output stage side fan)
Center color
CENTRAL button
status
power supply or PSU fan
fault detected
power supply
temperature protection active
7
status
MUTE
OUTPUT
MUTE
INPUT