Important Safety Instructions - Powersoft X Serie Manual De Instrucciones

Important safety instructions

EXPLANATIONS OF GRAPHICAL SYMBOLS
The triangle with the lightning bolt is used to alert the
user to the risk of electric shock.
CLASS3
WIRING
The triangle with the exclamation point is used to alert
the user to important operating or maintenance instruc-
tions.
The CE-mark indicates the compliance with the low volt-
CLASS3
WIRING
age and electromagnetic compatibility.
Symbol for earth/ground connection.
Symbol indicating that the equipment is for indoor use
only.
Symbol for conformity with Directive 2002/96/EC and
Directive 2003/108/EC of the European Parliament on
waste electrical and electronic equipment (WEEE).
Do not use the unit at altitudes above 2000 m.
Do not use the unit in tropical environment.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
ATTEMPT TO OPEN ANY PART OF THE UNIT. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
CLASS3
SERVICE PERSONNEL.
WIRING
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE,
DRIPPING OR SPLASHING LIQUIDS. OBJECTS FILLED WITH
LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS
CLASS3
APPARATUS.
WIRING
THE UNIT MUST BE INSTALLED IN RACK CABINETS ONLY: PLUG
THE AMPLIFIER'S MAINS CONNECTIONS VIA A SECTIONING
BREAKER TO A POWER DISTRIBUTION PANEL INSIDE THE RACK
CABINET.
CLASS3
WIRING THE SECTIONING BREAKER MUST REMAIN READILY ACCESSIBLE.
WHEN THE UNIT IS INSTALLED IN A RACK CABINET, MAKE SURE
THAT IT HAS SUFFICIENT SPACE ON ALL SIDES TO ALLOW FOR
CLASS3
PROPER VENTILATION (50 CM FROM THE FRONT AND REAR
WIRING
VENTILATION OPENINGS).
CLASS3
WIRING
CONNECTION TO THE MAINS SHALL BE DONE ONLY BY A
ELECTROTECHNICAL SKILLED
NATIONAL REQUIREMENTS OF THE COUNTRIES WHERE THE UNIT
CLASS3
IS SOLD.
WIRING
WARNING:
FUSE ON NEUTRAL
CLASS3
WIRING
16 | X Series
PERSON ACCORDING THE
CAUTION
RISK OF ELECTRICK SHOCK
DO NOT OPEN
Electrical energy can perform many useful functions. This unit
has been engineered and manufactured to ensure your personal
safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL
SHOCK OR FIRE HAZARD.
In order not to defeat the safeguards incorporated into this prod-
uct, observe the following basic rules for its installation, use and
service. Please read these "Important Safeguards" carefully be-
fore use.
Important safety instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this equipment near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
10. Only use attachments/accessories specified by the manu-
facturer.
11. Use only with the cart, stand, tripod, bracket, or table speci-
fied by the manufacturer, or sold with the ap-
paratus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
12. Unplug this apparatus during lightning storms or when un-
used for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
1