Procedures Required Before Using This Equipament; Install Rasther Pc; Upgrading Your Software And Enabling Makers - TECNOMOTOR RASTHER III Guia Rápido

RASTHER III / RASTHER BOX
Produzido por Tecnomotor Eletrônica do Brasil S/A - REPRODUÇÃO PROIBIDA - Eventuais erros ou defeitos favor comunicar [email protected]

Procedures required before using this equipament

Before start using Rasther, it will be necessary to install the program Rasther PC,
to enable carmakers acquired along with the equipment and then update the
program Rasther PC.
To enable automakers you will need to use a computer connected to the Internet.
Please, follow the procedure below before using your equipment.

Install Rasther PC

The Rasther PC installation program can be found on the CD "Manual de
Operações e Software Rasther PC", that accompanies the Rasther, or on
Tecnomotor site.
Run the program Rasther PC and follow the installation procedure.

Upgrading your software and enabling makers

Connect the Rasther to an external power supply that came with the equipment.
Connect the Rasther to a computer using the USB cable that came with the
equipment, as shown below.
Make sure that your computer is connected to the internet.
Run the program Rasther PC using the icon that was created on the desktop of
your computer after installing the software.
15