HEBU medical HRF 100 x-touch Instrucciones Para El Uso página 34

EN
1 Introduction
Our products are exclusively intended for professional use by appropriately trained and qualified
personnel and may only be acquired by them.
An electrosurgical unit is a generator used to transform electronic energy into high-frequency
alternating current (HF current).
If this current flows through human tissue, it creates heat which is used for cutting and for coagulation
of the tissue. Electrosurgery is one of the most important energy methods in surgery.
Of all surgical disciplines, it remains the most effective combination tool between tissue cutting and
hemostasis. The HRF 100 x-touch improves the surgical results thanks to 4.0 MHz radio wave
technology.
The high frequency of 4.0 MHz minimizes temperature losses and thus does not damage the cells in
the vicinity. The clinical advantages include the reduction of post-operative discomfort, the
minimization of necrosis, the maximum recognition of the histological specimens, improvement of the
healing process with excellent aesthetic results.
The HRF 100 x-touch is the best user-friendly electrosurgical unit for outpatient and clinical
applications. The maximum output power is 100 W, both in monopolar and bipolar operation. The
display, the selection of the modes and the output power values are carried out on a color screen.
The HRF 100 x-touch is a versatile and compact electrosurgical device that meets a high safety
standard and combines economy with operational flexibility.
It offers the following application modes:
For monopolar surgical use
•
Pure cut
•
Blend cut
•
Soft coagulation
•
Forced coagulation
For bipolar use:
•
Bipolar coagulation (mode "Bipolar Forceps")
•
Bipolar coagulation (mode "Bipolar Forceps AUTO Start")
The most important functions of HRF 100 x-touch are:
◼
Better control and safety, thanks to the integrated microprocessor technology in the modules for
activating high frequency energy (HF energy) via the handles and foot switches.
◼
High level of security thanks to the microprocessor module for monitoring the neutral electrode and
the interior design for operation with separate neutral electrodes
◼
Autotest after switching on
◼
One output for monopolar operation "Mono" and one output for bipolar operation "Bi".
◼
Polyphonic tone signaling with the possibility of regulating the tone strength when activating the
various operating modes, as well as information tone without the possibility of switching off in the
event of errors
◼
Light indication that uses the panel's RGB display for different operating modes or error states.
◼
Saving of 9 basic programs for monopolar and bipolar work (entered power and corresponding
operating model
34
HBS x-touch 200i