Mode Button; Range Button - koban KMD-13 Instrucciones Operativas

the high-input sensitivity. The reading will stabilize and give a
proper measurement when connected to a circuit.

MODE BUTTON

To select Diode/Continuity , DC/AC Hz/%Duty

RANGE BUTTON

When the meter is first turned on, it automatically goes into
AutoRanging. This automatically selects the best range for
the measurements being made and is generally the best
mode for most measurements. For measurement situations
requiring that a range be manually selected, perform the
following:
1. Press the RANGE button. The "AUTO" display indicator
will turn off.
2. Press the RANGE button to step through the available
ranges until you select the range you want.
3. Press and hold the RANGE button for 2 seconds to
exit the ManualRanging mode and return to AutoRanging.
(If backlight is turn on, please press BACKLIGHT button
it will turn off)
www.grupotemper.com
AUTORANGING MULTIMETER
KMD-13
15