Petsafe UL-275 Manual De Funcionamento página 2

UL-275 Receiver
The UL-275 Receiver contains electronics to detect the magnetic field carried
by the containment boundary wire, translates them, and delivers an static
correction. The static correction is delivered through two contact probes that
touch the dog's neck.
There are two sets of contact probes that can be used on your receiver.The
longer probes should be used on dogs with long hair.
The UL-275 Receiver is enclosed in a waterproof case and is mounted on a
polypropylene collar. The collar will fit a dog with a neck size varying from 9
to 22 inches.
The UL-275 Receiver contains a LED indicator light. The light acts as a low
battery light and confirms which one of five correction levels are set.
The receiver is equipped with memory backup. After you replace the batteries
in the receiver, you will not have to reset the correction level. The LED
indicator light will flash for the correction level last set.
Inserting the Battery Module in the Receiver
Remove the Battery Module From the Receiver - Insert a coin into the slot
just below the white arrow.Turn the coin counter-clockwise, and remove
the battery module. Peel the insulation tape off the module as shown in the
2
400-523-19-1 2 6/27/03, 8:13 AM
pictu
over
Inser
mod
with
and
comp
show
stops
be al
Test
Chan
level
level
Rece
to ch
with
the r
curre
once