Mounting On A Wall - TESY HL-245VB Manual Del Usuario

EN
This appliance is intended only for drying textiles
washed in water.
In order to avoid a hazard for very young
children, this appliance should be installed so
that the lowest heated rail is at least 600 mm above the
floor.
PACKAGE
•
After unpacking the appliance you should check if
it is not damaged during transportation and if all
the components are included! In case that you find
out any damage or incomplete package you should
connect with your authorized retailer!
•
Do not discard the original packing box! It could be
used to store the appliance during transportation in
order damages to be avoided!
•
The disposal of the packing material should be
done in the appropriate way! Children should be
prevented from playing with the polyethylene bags!

MOUNTING ON A WALL

Please ensure that the walls of the installation
1.
location without wires, pipes, etc., to ensure that the
device can be securely mounted on the wall
The appliance is intended only for vertical wall
2.
mounting! Floor or ceiling mounting is forbidden!
Never position the appliance right below a socket
3.
outlet!
The appliance should be assembled and connected
4.
by a qualified electrician. The installation process
should be isolated from the mains before electrical
connection works are to be done.
Position the power cord so that it does not hamper
5.
free movement of people and not to be stepped on!
Use only approved extensions, which are proper to
the appliance, i.e. they have a compliance sign!
The power cord should not be in touch with hot
6.
parts of the appliance!
Do not use the appliance in rooms smaller than 4
7. square meters.
The appliance inlet and outlet openings must not
8.
be blocked! Distance between the appliance and
the ceiling is at least 0.2m. Distance on both sides of
the appliance to the wall is at least 0.25m. Distance
between the outlet and the bottom is min 1.3m.
4
Usage and Storage Instructions
FIXATION OF THE APPLIANCE ON WALL
Choose a wall on which there is enough space
1.
Use a Ø6 drill to drill 6 holes according to following
2.
positions:
136
Fit the pegs from the accessory bag in these holes.
3.
Ø6
148,8 46
25,5
x6