Sbp - Sensor Board Pulse; Description - Siemens CBP Manual Del Usuario

06.2005
7

SBP - Sensor Board Pulse

7.1

Description

Connectable pulse
encoders
Temperature sensor
Siemens AG 6SE7087-6NX84-0FF5
SIMOVERT MASTERDRIVES
The SBP optional board (Sensor Board Pulse) enables a pulse encoder
to be connected up to the converter and inverter modules.
You can connect all conventional pulse encoders to the optional board.
The pulses can be processed as TLL or HTL level bipolar or unipolar
pulses.
Evaluation of the encoder signals is possible up to a pulse frequency of
410 kHz (4096 pulses per revolution at 6000 rpm). Encoder monitoring
by evaluation of the control track is also possible.
The supply voltage of the connected encoder can be set to 5 V or 15 V.
In addition to a pulse encoder, you can connect a temperature sensor
(either a KTY, PT100 or a PTC sensor) to the optional board for
monitoring the motor temperature.
Switches of bus
terminating
resistors
track A, B, zero
Switch for
encoder supply
64-pole
system connector
Fixing screws
Fig. 7-1 View of the SBP optional board
Option boards
SBP - Sensor Board Pulse
S1
X400
X401
7-1