Pioneer DVH-P5050MP Manual De Instalación página 5

Connecting the Units
Connection method
1. Clamp the lead.
Note
• The position of the parking brake switch depends
on the vehicle model. For details, consult the
vehicle Owner's Manual or dealer.
Light green
Used to detect the ON/OFF status of the parking brake.
This lead must be connected to the power supply side of the
parking brake switch.
Blue/white
To system control terminal of the power amp
or Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
+
Front speaker
≠
Left
+
Rear speaker
≠
With a 2 speaker system, do not connect anything
to the speaker leads that are not connected to speakers.
When you connect separately sold multi-channel processor
(DEQ-P7050) to this unit, do not connect anything to the
speaker leads and system remote control (blue/white).
Power supply side
Ground side
White
Gray/black
White/black
Green
Green/black Violet/black
2. Clamp firmly with
needle-nosed
pliers.
Parking brake
switch
Gray
+
Front speaker
≠
Violet
+
Rear speaker
≠
Right
En 5