Product Description; Display Elements - Wieland SP-DIO Instrucciones De Montaje

The samos®PRO COMPACT system meets the
basic requirement of Class A (industrial applica-
tions) according to the generic technical stand-
ard "Emitted Interference!"
CAUTION
The samos®PRO COMPACT system is therefore only
suitable for use in an industrial environment and not
in private areas.
2.5 Disposal
The disposal of unusable or irreparable devices should always be
done in accordance with the respectively valid country-specific
waste-elimination guidelines (e.g. European Waste Code 16 02 14).
3

Product description

3.1 Description
The module SP-DIO serves to extend a samos®PRO systems by up
to eight unsafe inputs and up to eight unsafe outputs.
Configuration of the module is carried out using the software
samos®PLAN6.
The module fulfills the following tasks:
 Forwarding the input information to the main module
 Receipt of control signals from the main module and correspond-
ing switching of outputs
The module SP-DIO cannot be used on its own, and always needs a
main module, see configuration software samos®PLAN6.
Simultaneous use of several SP-DIO modules is possible (a maxi-
mum total of twelve SP-DIO units in a system).
Each input/output extension module SP-DIO must be connected to
an external power supply for the outputs.

3.2 Display elements

Module status LED
4 input/output LEDs
(Function can be
configured)
6
4 input LEDs
SP-DIO
4 output LEDs
3.2.1 Display of module status-(MS) LED
MS-LED
Off

☼ Flashes red (1 Hz)
☼
Flashes green (1 Hz)
Lights up green

☼☼
Flashes red/green (1 Hz)
☼
Flashes red (2 Hz)
Lights up red

3.2.2 Displays of input/output LEDs
Input LED (I1...I4; IY5...IY8))
Output LED (Y1...Y4; IY5...IY8)
Off

Lights up green

☼ Flashes green (1 Hz) syn-
chronously with the
red/green MS-LED
3.3 Terminal allocation
Module
SP-DIO
Meaning
Power supply voltage below
operating range
Self test, system initialization
or invalid configuration
Module is ready for operation
Application is carried out
Rectifiable error on output (Y1-
Y4, IY5-IY8)
Critical error (type3) in the
system, probably in this
module. Application is
stopped.
Critical system error
Meaning
Input/output is inactive
Input/output is active
Output is faulty A rectifia-
ble error is pending
Clamp assignment
A1 24 V
A2 GND
I1 ... I4 Inputs 1 to 4
IY5 ... IY8 Inputs/outputs 5
to 8 (individually
configurable with
samosPLAN6)
Y1 ... Y4 Outputs 1 to 4