Programming Your Timer; Manual Watering; Water Budget; Additional Features - Orbit 57860 Manual De Instrucciones

PROGRaMMING yOuR TIMER

Press to select the desired days to
water: select either days of the week,
interval (every 1 to 32 days), or odd/even
days.
Press to highlight your option(s).
If INT is chosen press or to change
interval.
Press or to deselect an option.
Step 6–How Long
Turn the dial to HOW LONG.
Press to select the desired program.
Press to select the desired station.
Press or to set the run time (0 to
240).
Repeat for other stations if needed.
6
Step 7–auto
Turn the dial to auTO.
The set program(s) will run automatically.

Manual Watering

To manually run a program:
while dial is in the auTO
Press
position. The timer will run all set
programs.
To select only the A or B program, or
individual stations:
Press to select only A or B program.
Press again to set individual watering
times for stations.
NOTE: Manual watering of a set program
(A or B) will only work after programming
has been set up.
Press to cancel watering.
Off
Turn dial to Off.
No watering may occur while in the Off
position.

Water budget

Turn dial to WaTER buDGET.
NOTE: This feature allows for seasonal
adjustments.
Set the value to 100% to water exactly as
programmed.
For a 10 minute run time, 50% will reduce
it to be 5 minutes and 200% will increase it
to 20 minutes.
Press to select the desired program.
Press or to set the budget value
(10% - 200%).

aDDITIONaL fEaTuRES

Press to reset the value to 100%.
NOTE: The % symbol will show on the
screen when the value for A or B is
anything other than 100%.
Rain Delay
NOTE: Rain Delay will cancel all scheduled
watering for a 24hr, 48hr, or 72hr period.
Press while dial is in the auTO
position.
Press until the desired delay is
displayed.
Do not press any buttons for 3 seconds to
start the delay.
Press to stop Rain Delay and return to
scheduled watering.
7