Shutting Off The Refrigerator; Lighting; Changing The Decor Panel - Dometic RMS 8400 Instrucciones De Uso

5.9

Shutting off the refrigerator

Fig. 33
Fig. 35

5.10 Lighting

Fig. 37

5.11 Changing the decor panel

L
P
For battery igniter models, set energy selec
tor switch A to position "OFF". The appliance
is switched off (Fig. 32).
Mode
Press the "MODE" button to switch off MES
and AES models. Keep button (A) pressed for
2 seconds. The display disappears and the
appliance is fully switched off (Fig. 33).
Fig. 34
Release the locking mechanism of the door
lock by pushing it and shift it to the front. If the
door is shut in this position, a small gap is
nevertheless kept open to prevent formation
of mildew.
If the refrigerator is to be taken out of service
for an extended period of time, close the on-
board shut-off valve and the cylinder valve.
Fig. 36
If the door is open for more than 2 minutes, the
sensor-controlled interior lighting is automati-
cally cut off (except for models with battery igni-
ter).
Remove the lateral ledge L from the door
(ledge is attached, not screwed).
Shift decor panel P away from the door and
insert the new decor panel. Re-attach ledge
L.
Decor panel dimensions :
Casing
width
486 mm
523 mm
Fig. 38
16
Height Width
742+/-1 mm 471+/-1 mm
742+/-1 mm 508+/-1 mm
Thickness
max. 2 mm
max. 2 mm