Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Maintenance

General Maintenance
Inspect the log set regularly, depending
upon conditions, and at a minimum
yearly intervals. Remove dust and
clean the logs, mat, grate, and base as
required.
Except for installation and cleaning
described in this manual, an authorized
service representative should perform
any other servicing.
WARNING: Disconnect power and
allow heater to cool before attempting any
maintenance or cleaning to reduce the risk
of fire, electric shock, or injury.
Clean Logs and Base
The log set should not be operated with
an accumulation of dust or dirt on or in
the unit, as this can cause a build up of
heat and eventual damage.
Dust and vacuum the log set as
needed. Use a damp cloth and a mild
detergent to clean painted surfaces
of the fireplace. Never use abrasive
cleaners.
Clean Mirage
The Mirage
Flame Panel is cleaned
in the factory during the assembly
operation. During shipment, installation,
handling, etc., the screen may collect
dust particles; these can be removed
by dusting lightly with a clean dry cloth.
To remove fingerprints or other marks,
clean the Mirage
a damp cloth. Never use abrasive
cleaners. Dry the screen completely
with a lint free cloth to prevent water
spots.
Flame Panel
Flame Panel with
TM
Battery Replacement
To replace the battery:
1. Push the release tab toward the
center and slide the battery cover
open.
2. Install 3V Lithium battery in the
battery holder. The positive (+) side
of the battery faces up.
3. Close the battery cover.
OPEN
PUSH
RELEASE ---- DÉGAGER
Lithium Battery--Batterie au lithium
Battery must be recycled or
disposed of properly. Check with
your Local Authority or Retailer for
recycling advice in your area.
---- OUVRIR
---- POUSSER
CR2025/2032
OPEN
RELEASE
PUSH
OPEN
11
Tabla de contenido
loading

Este manual también es adecuado para:

Revillusion rlg25fc

Tabla de contenido