Charging The Battery; Bluetooth Function - Trevi XF 440 KB Notas De Uso

CHARGING THE BATTERY

At the first use of the device, charge it for 5 hours.
1. With device in OFF, insert the charging cable into the DC 5V socket (2) on the unit and
plug the adapter to the power source;
2. The LED indicator positioned near the socket will light up in Red;
3. When charging is complete, the LED indicator will turn off.
Note:
- For a good battery life it is recommended to keep the unit off during charging.
- The device's autonomy with the fully charged battery is about 90/120min depending
on the volume.
POWERING ON/OFF
1. Push the OFF/ON switch (1) into ON position (down) to switch ON the unit;
2. Push the OFF/ON switch (1) again to switch OFF the unit.
VOLUME ADJUSTMENT
1. Turn the master volume (7) clockwise to increase the volume of the unit;
2. Turn the master volume (7) counter-clockwise to decrease the volume of the unit.

BLUETOOTH FUNCTION

HOW TO PAIR YOUR DEIVCE TO THE UNIT
1. Make sure the Bluetooth function is switched on in your device (e.g. smartphone,
tablet);
2. Switch on the unit and press the MODE button repeatedly to select the Bluetooth mode.
The display will show "Blue";
3. Once the Bluetooth pairing indicator begins flashing, you will find the unit listed in the
Bluetooth connections list of your device (as XF 440 KB);
4. If asked for a passcode, enter "0000";
5. The LED indicator will flash when searching for a Bluetooth device and stay on when
the devices are paired.
Notes:
- The speaker can only works with a Bluetooth connection, free it can not be interrupted
during normal operation.
The proximity of TV sets, fluorescent lamps or other appliances may cause interference
in the reception, in this case, to move the unit.
CONTROLS AVAILABLE IN BLUETOOTH MODE
9
- Press the (9) button or
- When playing files, you can press
10
:
(10) button to go to a previous or next track.
(8) button to pause and resume playback.