REMOTE CONTROL COMMANDS
1. MUTE function
9
2. Key
, previous
3. MODE button
4. REC button
5. ECHO- button
6. Low tone adjustment keys
7. EQ button, predefined equalizations
8. Microphone volume adjustment keys
9. Power/ standby button
10.
button, Play/ Pause
CHARGING THE BATTERY
1. With the appliance off, connect the power supply cable to the socket (6) on the device.
Connect the power supply to a mains socket;
2. The Led indicator (7) will light up in Red;
3. When charging is complete, the LED indicator (7) will turn green;
4. With the battery low, the last segment of the battery icon on the display will flash for
a certain time, then the device will automatically go into standby mode.
Note:
- For a good battery life, it is recommended to keep the device off during the charging phase.
Unless otherwise specified, the commands described below apply to both the unit and
the remote control.
ON/ OFF
-
Use the On/ Off switch (8) to turn the appliance on and off.
-
Press the STANDBY button (9) on the remote control to put the unit in stand-by mode;
press it again to turn the unit back on.
VOLUME/ MUTE/ TONE/ ECHO EFFECT
1. Turn the Volume knob (19) to increase/ decrease the volume of unit; press MUTE (1)
button on the remote control to silence the device, press it again to return to normal
listening;
2. Press the MENU button (11) and turn the knob (15) to set the high, low microphone
tones and echo effect;
3. Through the EQ button (12) it is possible to change the audio dynamics by choosing
from the preset ones: POP , ROCK, JAZZ, CLASSIC, COUNTRY, FLAT.
ON/ OFF VOICE GUIDE
Press and hold the MODE button (14) on the unit to switch On/ Off the voice guide.
BLUETOOTH OPERATION
PAIRING TO DEVICES
1. Put the speaker near the Bluetooth device to be paired and switch On the device;
:
11. Key
, next
12. LIGHT button (Led disco light effects)
13. REPEAT button
14. REC/ PLAY button
15. REC DEL button
16. ECHO + button
17. M-PRI key, microphone priority
18. Treble keys
19. Volume adjustment keys
20. Numeric keys
11