Bluetooth Function; Using The Microphone - Trevi XF 1700KB Manual Para El Uso Y La Conexión

ENGLISH

BLUETOOTH FUNCTION

1. Turn on the machine and press the MODE(6) on unit, or the MODE(34) on remote control to select the Bluetooth function, the
display shows "BLUE".
2. In the Bluetooth mode, the symbol
3. Activate the Bluetooth feature on the external device to be coupled.
4. Initiate a search for devices. After select the "XF 1007KB".
5. Enter the password "0000" if required.
6. Press the PLAY button(4)on the unit or the key(30) on remote control, to start playing and the buttons NEXT(7) and PREV(5),
or the keys :NEXT(38) and 9LAST(36) for the selection of songs.
PLAY ON INPUT USB/SD
1. Turn on the unit.
2. Insert a USB memory or an SD card into the USB(10) or SD(9) slot. Playback starts automatically.
3. To pause playback, press the PLAY button(4) on the unit or the key (30) on remote control, the display will show "PAUS".
4. To resume playback, press the PLAY button(4) on the unit or the key (30) of the remote control.
5. Press the NEXT(7) or key : NEXT(30) on remote control while listening to switch to the next track. Press the PREV (5) or 9
LAST(36) on remote to go to the previous tracks.
6. Using the numeric keypad(29) on remote control you can directly enter the number of the song you want to play.
7. Press once REPEAT button(28) on the remote, the display(3) will show "ONE", to continually play the same track; press it a
second time, the display(3) will show "ALL" to continuously play all songs in the USB/SD.
Note:
- The player may not support some USB devices, this is due to the incompatibility of some processors.
- To avoid harmful interference, always connect USB devices directly to the unit, do not use extension cords.
- From the computer to format the USB memory/SD FAT (16 or 32).
AUX-IN
1. Turn on the unit.
2. Connect any unit equipped with audio output, through a cable 3.5mm jack (not included) to the AUX IN(26).
3. Press the MODE button(6) on the unit, or the MODE(33) on remote control, and select the "LINE-IN", the display will show "LINE".
4. Use the external device from their commands.

USING THE MICROPHONE

1. Connect the supplied microphone into the jack MIC1(16) or MIC2(15).
2. Turn on the microphone using the switch on the handle of the microphone to the ON position.
3. Adjust the volume of the microphone input(18) and the echo effect(19) as desired using the appropriate commands.
Note:
- You can use two microphones simultaneously (second microphone not included).
RECORDING
MUSIC RECORDING
This unit and 'capable of recording on USB or SD card memory the music from radio function (it is NOT possible to record from
the Bluetooth, Aux-in). The device will automatically create a folder called "JLR Rec" inside the USB memory or SD Card and it will
store all log files.
1. Turn on the unit.
2. Insert a USB memory or a SD Card into the socket.
3. Select the Radio function by MODE button(6) on the unit, or the MODE(33) on the remote control.
4. Press REC button(23) on the unit or the RECORD button(34) on the remote control to start recording, the display(3) and time
signature will start.
5. Press REC button(23) on the unit, or the RECORD button(34) on the remote control to stop recording. The device will automa-
tically go into USB function to immediately playback the recorded file. After playing the unit will report on the initial function.
Note:
-
You can record the audio only from Radio functions. Even inserting and using the supplied microphone, the unit will record
only the audio signal transmitted from these sources, it will not record the vocals done with the microphone.
- When you turn on the "Registration" all the controls of the unit are inhibited including volume adjustment, they will take their
normal function when the recording will stop.
on display(3) will start flashing, the system automatically enters search mode.
11
XF 1700KB