Using The Microphone; Input Guitar - Trevi XF 1000KB Guía De Uso

ENGLISH
BLUETOOTH OPERATION
1. Turn on the machine and press the FUNC. (25) to select the Bluetooth function, the display shows BT.
2. In the Bluetooth mode, the PAIR LED (12) will start flashing, the system automatically enters search.
3. Activate the Bluetooth feature on the external device to be coupled.
4. Initiate a search for devices. After select the "XF1000KB".
5. Enter the password "0000" if required.
6. Press the tasto/ / PAIR (23), to start playing and the buttons 9 (24) or : (22) for the selection of songs.
7. Press and hold the button for a few seconds / / PAIR (23) to eliminate the paired device and make a new pairing operation.
AUX-IN
1. Press the FUNC. (25) on the unit to select the "AUX" input.
2. Connect any unit equipped with audio output through a cable 3.5mm jack (not included) to the AUX IN (11).
3. Use the external device from their commands.

USING THE MICROPHONE

1. Connect the supplied microphone into the jack MIC1 (9) or MIC2 (8).
2. Turn on the microphone using the switch on the handle of the microphone to the ON position.
3. Adjust the volume of the microphone input and the echo effect as desired using the appropriate commands.
Note: you can use two microphones simultaneously (second microphone not included).

INPUT GUITAR

This device can amplify a guitar or other preamp music instrument.
1. Connect the cable of the guitar by inserting it into the GUITAR (10) input.
2. Adjust the volume of input GUITAR as desired using the appropriate command.
SPECIFICATIONS
Power Supply:
Consumption:
Maximum output power:
Sound Bar Dimensions:
Class Bluetooth:
Bluetooth peak transmission power: ................................................................................................ 2,5mW
Bluetooth max power transmission: ................................................................................................ 1,9mW
Band transmission Bluetooth:
Weight:
INFORMATION NOTE ON THE REMOVAL AND DISPOSAL OF BATTERIES
Warning: Only high-qualified personnel should perform this operation!
BATTERY REMOVAL
The appliance should not be plugged to the mains socket when performing this operation!
1. Remove the screws that secure the structure of the trolley and take it apart.
2. Remove the screws that secure the rear panel speaker amplified and remove the panel;
3. Locate the battery;
4. Remove the screws that secure the supports of the battery, remove the supports, disconnect the battery and remove it.
Used batteries should not be disposed of with household waste or thrown into fire or water. Used batteries should be recycled or disposed of in
separate waste collection centres.
.......................100-240V ~ 60/50Hz - internal lead acid rechargeable battery 12V
............................................................................................. Max 30W
.................................................................................................. 100W
................................................................................ 340x330x610mm
......................................................................................................... 2
................................................................................................ 2,4GHz
..............................................................................................12.56 kg
8
XF 1000KB
7.2Ah