Remote Control Operation; Remote Control Batteries Installation; Laser Pointer Function - Christie LX55 103-008100-01 Guía De Referencia Rápida

REMOTE CONTROL OPERATION

LASER POINTER
(DRAG ON) INDICATOR
Left Side
Lights red while the laser
beam is emitted from the
Laser Light Window.
Lights green when dragged
to the "ON" position.
MUTE BUTTON
Used to mute the sound.
DRAG ON/OFF BUTTON
ALL OFF SWITCH Used to select the DRAG
ON/OFF position.
When using the remote control,
turn this switch to "ON." And turn
LEFT CLICK BUTTON
it to "ALL OFF" when it is not in
Used as a PC mouse in
use.
Wireless
INSIDE THE BATTERY
Operation. Press this
COMPARTMENT BOX button and the mouse
This Remote Control provides the
pointer button to drag the
DIP switches into the battery selected screen object.
compartment box.
Slide the SW4 (LASER ON/OFF LASER BUTTON
switch) to the "OFF" position. The
Used to operate the Laser
Laser Pointer function is not
Pointer function. The laser
operated.
beam is emitted when
Set the Switches 1-3 as shown in
pressing this button for
table below depending on the
one minute.
Code No. that you want to select
When using the Laser
as the remote control code.
Pointer for more than one
minute, release
button and press it again.
DIP SWITCH SETTING
SW4 ........ LASER ON/OFF
SW1 SW2 SW3 Code No.
ON ON ON ON Code 1 Code 1
ON ON OFF Code 2
FOCUS BUTTON
ON OFF ON Code 3
ON OFF OFF Code 4
OFF ON ON Code 5 Used to adjust focus.
OFF ON OFF Code 6
OFF OFF ON Code 7
OFF OFF OFF Code 8

LASER POINTER FUNCTION

This remote control emits laser beam from the Laser Light Window when used as a Laser Pointer. When the
LASER button is pressed, the laser light goes on. When the LASER button is being pressed for more than one
minute or when it is released, the light goes off. The LASER POINTER INDICATOR lights RED and the LASER
is emitted with RED light to indicate the laser beam is being emitted.
The Laser emitted is the Cass II laser. Do not look into the Laser Light Window or shine laser beam onto
yourself or other people. The three marks shown below are caution labels for the laser beam.
CAUTION: Use of controls, adjustments, or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
LASER POINTER INDICATOR
LASER LIGHT
WINDOW
POWER ON-OFF BUTTON
Used to turn the projector
on or off.
AUTO PC ADJ. BUTTON
Use to operate the AUTO
PC Adjustment function.
IMAGE BUTTON
Used to select the image
level.
KEYSTONE BUTTON
Used to correct keystone
distortion.
Mouse
MOUSE POINTER
Used as a PC mouse in
Wireless Mouse Operation.
RIGHT CLICK BUTTON
Used as a PC mouse in
Wireless Mouse Operation.
LENS SHIFT BUTTON
Used to select the Lens
Shift function.
WIRED REMOTE JACK
this
When using as a Wired
Remote Control, connect a
remote control cable (not
supplied) to this jack.
Battery installation is
required when using as a
Wired Remote Control.
These caution labels are put on the remote control.
D.ZOOM BUTTON
Used to select the
DIGITAL ZOOM +/–
mode and resize the
image.
SELECT BUTTON
Used to execute the
selected item, or
expand/ compress the
image in the DIGITAL
ZOOM +/- mode.
MENU BUTTON
Used to select the
MENU Operation.
P-TIMER BUTTON
Used to operate the P-
TIMER function.
ZOOM BUTTON
Used to adjust zoom.
COLOR MANAGEMENT
BUTTON
Used to operate the
Color management
function.

REMOTE CONTROL BATTERIES INSTALLATION

Open the battery Install new batteries
1 2
compartment lid. into the compartment.
Press the lid
downward and slide it.
To insure safe operation, please observe following precautions:
● Use two (2) AA or LR6 type alkaline batteries.
● Always replace batteries in sets.
● Do not use a new battery with an used battery.
● Avoid contact with water or liquid.
● Do not expose the remote control to moisture, or heat.
● Do not drop the remote control.
● If a battery has leaked on the remote control, carefully wipe the case clean and install new
batteries.
● Danger of explosion if battery is incorrectly replaced.
● Dispose of used batteries according to batteries manufacturers instructions and local rules.
Operating Range
Point the remote control
NO SHOW BUTTON
toward the projector (a
Used to turn the picture
Receiver Window) when
into a black image.
pressing any
Maximum operating range for
FREEZE BUTTON
the remote control is about
Used to freeze the
16.4' (5 m) and 60° in front
picture.
and rear of the projector.
POINT (VOLUME +/-)
BUTTONS
Used to select an item or
adjust a value in On-
Screen Menu. They are
60°
also used to pan the
image in the DIGITAL
ZOOM +/- mode.
The POINT LEFT/RIGHT
buttons are also used as
16.4'
VOLUME +/- buttons.
(5 m)
INPUT 1 BUTTON
Used to select an input
source (INPUT 1).
INPUT 2 BUTTON
Used to select an input
source (INPUT 2).
INPUT 3 BUTTON
16.4'
Used to select an input (5 m)
source (INPUT 3).
NETWORK BUTTON
Used to select a
network input (optional).
Replace the compartment
3
lid.
Two AA size
batteries
For correct polarity (+
and –), be sure battery
terminals are in
contact with pins in
the compartment.
button.
60°