Installation With Isofix Fasteners + Support Leg. Semi-Universal - JANE EXO Instrucciones

2 Installation with ISOFIX fasteners + support leg. SEMI-UNIVERSAL

The support leg system is an OPTIONAL acces-
sory that means our EXO seat can be used in a
wider range of vehicles, making it possible to
install it in cars that do not have the UNIVER-
SAL top tether fastener.
The accessory includes a list of vehicles to de-
For correct installation follow the steps below:
2a Extract the ISOfix fasteners (10) pulling the
lever (12) situated on the front of the base.
2b
Guide both fasteners towards the axles and
press until both sides are locked, two green
lights on the front panel (11b) or two green
signals on the fasteners (10) will indicate that
both are fastened. If one or both lights and / or
signals are red, try it again.
termine which models are suitable for installa-
tion of the SEMI-UNIVERSAL system. If your car
is not on the list please contact the retailer.
2c Pulling the fastener extraction lever again
(12), press the seat against the backrest of the
vehicle. Continue to press while releasing the
lever and the fasteners will remain immobile.
2d Turn the covers on the slots that are on the
front part of the seat and pull outwards to take
them off.
41