Installing The Baby In The Seat; Adjusting The Harness - JANE EXO Instrucciones

4 Installing the baby in the seat.

4a Loosen the harness pulling the straps
over the buckle while pressing the tightening
button.
4b
Unfasten the buckle (5). To make it easier to
install the baby in the seat, you can fasten the
seat belts in the side straps.
4c
Position the baby in the seat making sure

5 Adjusting the harness.

Adjusting the height of the shoulder strap.
With the child correctly seated in the seat
check that the shoulder straps are in the co-
rrect position, they should be slightly above the
baby's shoulders. EXO has 5 heights, when the
height is adjusted the headrest moves. To chan-
ge the height, follow the steps detailed below:
that he is sitting as far back as possible and
with the backrest upright. Join together the
upper ends of the buckles.
4d
Insert them in the lock and press until it
clicks.
4e Pull the tightening strap (6).
5a
Pull the ring situated on the headrest (4),
this will unlock the headrest.
5b Move the headrest (3) into the position sui-
table for the baby and release the ring. Move
the headrest until you hear the locking click.
Pull the headrest to check that it is secure.
43