Features Of Your I-Race Booster Seat With Backrest; Installation Without Isofix Anchors; Installation With Isofix Anchors; Adjusting The Height Of The Headrest - JANE iRACER Manual De Instrucciones

D. FEATURES OF YOUR i-RACER BOOSTER
SEAT WITH BACKREST
The i-RACER safety seat has been designed using the latest ad-
vances in safety and comfort:
• The height of the shoulder belts is adjusted without the need
to remove the belt. This action is connected to the headrest
that offers better protection in the event of side impact while
simultaneously supporting the head. It has 11 different height
positions.
• The interior of the seat is covered with shock absorbing ma-
terial.
• The seat can be reclined in 4 different positions.
• It is fitted with a spacer element that provides extra protection
in the event of side impact.
E. INSTALLATION WITHOUT ISOFIX ANCHORS
• If you decide to install the i-RACER booster seat with back-
rest without the ISOFIX anchors, simply position the safety seat
on the vehicle seat, pass the seat belt through the lower belt
guides (6) and the one found on the side of the headrest (5).
These guides are marked green.
18
EN
1
F. INSTALLATION WITH ISOFIX ANCHORS
The booster seat with backrest can be fastened with the ISOFIX
anchors, which gives it greater lateral stability.
• The ISOFIX anchors (4) are extracted by pressing the buttons
(4a).
In some vehicles, the ISOFIX anchors can be difficult to access
or they are concealed between the foam of the vehicle seat.
The safety seat comes with two guides (11) making it easier to
locate the anchor points. Insert the guides before the next step.
• Guide the anchors towards the axles in your vehicle and press
until both sides are locked into place, two green signals on the
sides of the anchors (4b) will indicate that they are anchored in
place. If one or both of the signals is red, try again.
• Press the booster seat against the backrest of the vehicle
2
seat. .c
G. ADJUSTING THE HEIGHT OF THE HEADREST
The height of the headrest can be adjusted using the handle
found on the back of the headrest (9). To release it pull the han-
dle upwards, when you release it, the headrest will lock into the
3
nearest position. .a
• Pass the shoulder section of the vehicle seat belt through the
2 2
.a + .b