Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SM 1619X09152 06-14_2354 USB 6/3/14 10:15 AM Pag
Do not drill, fasten or break into existing
walls or other blind areas where electrical
wiring may exist.
unavoidable, disconnect all fuses or circuit
breakers feeding this worksite.
Battery tools are always in an operative
condition. Be aware of the possible hazards.
lways wear safety goggles or eye
protection when using this tool.
Secure the workpiece, never hold it in your
hand or across legs. The drilling action may
cause
you
workpiece and injury may occur.
W RNING
within the collet. If the bit is not inserted deep
enough, the grip of the collet over the bit is reduced
and the loss of control is increased.
Do not run the tool while carrying it at your
side.
spinning bit could become entangled
with clothing and injury may result.
Do not use dull or damaged bits and
accessories. Dull or damaged bits have a
greater tendency to bind in the workpiece.
W RNING
grinding, drilling, and other construction
activities contains chemicals known to
cause cancer, birth defects or other
If this situation is
to
lose
control
When installing a bit, insert
the shank of the bit well
Some dust created by
power sanding, sawing,
8
of
the
Tabla de contenido
