7�1�4
Copying a JOB
7�1�5
Welding with a JOB
Set Job Mode and turn knob I, or the torch UP/DOWN pushbuttons to navigate between saved JOBS. A JOB can be
selected when the machine is in standby or while it is delivering power.
Switching between JOBS with the arc on is NOT allowed when they relate to different processes, e.g.:
- MIG/-TIG,
- TIG -> MMA
7�1�6
JOB Details
7�1�7
Allow adjustment of a JOB
3301065/A
Select the memory position of the JOB to be
copied by turning knob I�
Press
and the JOB will be copied to the
memory. Select a free memory location using I
and press
. The JOB will be copied to the
new position.
Select the memory position of the JOB to be used by turning knob I.
Press the Job Mode pushbutton to activate welding with the selected JOB
The Job Mode operating mode is active with the selected JOB (1 in the
example).
Select the JOB memory position by turning knob I.
Press the pushbutton
The following pushbuttons can be used:
-
to edit the JOB name.
-
to save all JOB settings in PDF format onto a USB drive.
Press Menu -> Settings to select Allow Job
Adjustments, set to ON.
Now the following parameter values can be
changed within the JOB.
- A_m/min_mm.
- impedance
- arc length
.
- Icon
indicates that a JOB adjustment
has been carried out.
85/109