Repacing The Amplifier Pcb - NAMCO WANGAN MIDNIGHT Manual Del Operador

8-4

Repacing the Amplifier PCB

1. Remove the floor plates.
2. Disconnect the connectors shown shaded in the diagram below.
3. To remove the Amplifier PCB from the locking supports, squeeze the tabs of
the support together and gently lift the PCB upwards. Repeat for each
support.
Locking support
Pliers
< To remove >
PC board
< To reinstall >
4. Reassemble in reverse order.
(see 5-3 page 38)
Click!
Page 66
Amplifier PC board
Connector