Technical Information - IKEA GRILLSKAR Manual Del Usuario

STORAGE
Do not leave your barbecue uncovered when not
in use. Store your barbecue in a cool dry place
like a shed or garage when not in use to protect
against the effects of extreme weather conditions,
particularly if you live near coastal areas.
Prolonged exposure to sunlight, standing water,
sea air/saltwater can all cause damage to your
appliance. (A cover may not be sufficient to protect
your appliance in some of these situations).
• Cover the burners with aluminium foil in order
to prevent insects or other debris from collecting
in burner holes.
• If the barbecue is to be stored indoors, the gas
cylinder must be disconnected and left outside.
• The gas cylinder should always be stored
outside, in a dry, well-ventilated area, away from
any sources of heat or ignition. Do not let
children tamper with the cylinder.
• Always inspect the hose for cuts, cracks or
excessive wear before use.
• If the hose is damaged or there is excessive
abrasion or wear or the hose is cut, it must be
replaced with a hose suitable for use with LPG
and meet the national standards for the country
of use and must be as specified by the
manufacturer. The length of the hose shall not
exceed 1.5m.
TROUBLESHOOTING
PROBLEM
Burner will not light using the
ignition system
Low flame or flashback (fire in burner tube - a hissing or
roaring noise may be heard)
Gas valve knob difficult to turn

TECHNICAL INFORMATION

This barbecue is designed for outdoor use only
using propane gas. Please read all accompanying
documentation carefully.
DENMARK (DK)/ NORWAY (NO)/ SPAIN (ES)
Gas category: I3B/P(30)
Gas type and pressure: Propane/30mbar
Maximum gas consumption: 1029gm/h
Total heat input: 14.4kW
Main burners injector size: 0.95mm Countries intended for: DK/NO/ES
HOW TO REACH US IF YOU NEED OUR SERVICE
Contact your local IKEA store. You will find the
address and phone number in the IKEA catalogue
or at www.IKEA.com.
To ensure that we provide you with the best
assistance, please read carefully the Assembly
Instructions and/or the User Instruction section of
this manual before contacting us.
POSSIBLE CAUSE
LP gas cylinder is empty
Faulty regulator
Obstructions in burner
Obstructions in gas jets or gas
hose
Electrode wire is loose
Electrode or wire is damaged
LP gas cylinder too small
Obstructions in burner
Obstructions in gas jets or gas
Windy conditions
Gas valve jammed
© Inter IKEA Systems B.V. 2020
SOLUTION
Replace with full cylinder
Have regulator checked or
replace
Clean burner
Clean jets and gas hose
Reconnect wire
Change electrode and wire
Use larger cylinder
Clean burner
Clean jets and gas hose
Use BBQ in a more sheltered
position
Replace gas valve
40
AA-2261274-2