Start Up; Unpack The Device And Unload It; Pushing/Towing The Device (Without Engaging Self-Propulsion); General Notes En - Kärcher B 300 RI LPG Manual De Instrucciones

5

Start up

5.1

Unpack the device and unload it

DANGER
Risk of injury, risk of damage!

The vehicle is not approved for crane loading.

Do not use a forklift to unload/load the appliance.

The packaging material (plastic bag, thermocol, etc.) is
a potential source of danger and should not reach the
hands of children.

Carefully unpack the device while refraining from using
any tool that could damage the device. After unpacking,
5.2

Pushing/towing the device (without engaging self-propulsion)

5.3 General notes
Read the operating instructions of the engine manufac-

turer before start-up and follow the safety instructions
carefully.
Park the machine on an even surface.

Remove ignition key.

check whether the device is complete and fully func-
tional. If not, call customer service.
Note information regarding pushing/towing the device

in a later chapter.
Mind the vehicle weight during loading!

Net weight (transport weight)
The freewheel (bypass) of the hydraulic pump must first be
opened before the device can be pushed/towed.
DANGER
Risk of injury!

Secure the device against rolling away prior to opening
the freewheel.
Note
The travel drive is inoperable.
Braking effect exists no more.
CAUTION
Risk of damage to the hydrostatic axle drive!

Do not move the device for long distances without en-
gaging self-propulsion; a speed of 5 km/h should not be
exceeded.
1 Hydraulic pump
2 Screw for freewheeling (bypass)
Open engine cover.

Open freewheel (bypass)
Open the screw for the freewheel by at least 1/2 revo-

lution (anti-clockwise).
Close freewheel (bypass)
After moving/towing the device, turn the screw for the

freewheel back until it stops (clockwise).
1 Towing eye
To tow the vehicle, attach the towing eye to the device

at the front.
Lock parking brake.

10
-
EN
1750 kg
3850 lbs
11