Operation; Cleaning And Maintenance - cecotec CONGA POPSTAR 4070 H20 MAX Manual De Instrucciones

ENGLISH
The adapter might become warm during charging, this is normal and does not affect to its
operating.
When not being used for a long time, we recommend disconnecting the device from the power
supply.

3. OPERATION

Upright Vacuum Cleaner
Turn on the device by pressing the power button.
Press the suction power button to select the desired power level.
Handheld vacuum cleaner
To clean tables, furniture and car seats, press the handheld vacuum cleaner release button to
remove the handheld vacuum cleaner.
Press the handheld vacuum cleaner power button to activate it.
Assembling 2-in-1 accessory
To clean corners or other narrow spaces or difficult objects, the 2-in1 accessory can be fitted
into the handheld vacuum cleaner suction nozzle. Select the desired accessory and place it in
its place.
Fig. 4
Assembling the mop cloth
Open the water tank lid, fill it with water and close it properly again.
Assemble the water tank and attach the cloth.
Operate the device normally to vacuum and mop the floor.
It is recommended to moisten the mop cloth with water in order to achieve more uniform
scrubbing results.
Fig. 5
Along with water, you can use a small amount of non-abrasive and non-dense liquid.

4. CLEANING AND MAINTENANCE

Emptying and cleaning the dust tank and filter
Take the handheld vacuum cleaner out.
Remove the dust tank by pressing the release button and turning the tank.
Pull the filter out and empty the dust tank.
The dust tank and the filter can be rinsed with warm water. Make sure all the parts are
completely dry before reassembling them.
25
POPSTAR 4070 H2O MAX