Technical Specifications - cecotec CONGA POPSTAR 4070 H20 MAX Manual De Instrucciones

ENGLISH
Fig. 6
Cleaning the main brush
If the brush becomes blocked or tangled, the device's performance will be affected. In this
case, clean the brush.
Open the brush compartment.
Fig. 7
Take the main brush out by pulling from it and clean it.
It is suggested to clean the brush after each use.
Cleaning the wheels
To prevent the wheels from blocking and from wearing off, it is suggested to clean them after
each use.
Use a screwdriver to unscrew the wheels and take them out of their compartment.
Remove any dirt stuck to them or to their axes.
Insert the wheels in their compartment and press them down to assemble them back.
Cleaning of the water tank and the mop
After each use:
Remove the mop and clean it. Make sure it is completely dry before using it again
Clean and rinse the water tank.
In case the mop cloth is very used, replace it by a new one.
Fig. 8
Replacing the battery
The battery is a consumable part which can wear off with use and time. If it is damaged or
wears off, contact the Technical Support Service of Cecotec to acquire a new one.
The battery can be removed as shown in this picture:
Fig. 9

5. TECHNICAL SPECIFICATIONS

Product reference: 05549
Product: Conga PopStar 4070 H20 Max
Battery: 40,7 V, 2200 mAh Li-ion
220-240 VAC ~ 50/60 Hz
Made in China | Designed in Spain
26