Product Assembly; Operation; Cleaning And Maintenance - cecotec CONGA POPSTAR 15300 ASH STEEL Manual De Instrucciones

ENGLISH

3. PRODUCT ASSEMBLY

Assemble the high-efficiency filter to the dust tank.
Cover the high-efficiency filter with the metal mesh filter.
Assemble the dust tank to the device.
Install the fabric filter on the dust tank border.
Insert one end of the hose to the suction hole.
Install the XXL metal nozzle or the extension tube.
Choose an accessory and attach it to the suction hole or the hose.

4. OPERATION

Before turning the device on, make sure all the filters are correctly assembled.
Unwind the power cord.
Plug the device on to a socket and switch it on.
When the full tank indicator turns on red, clean or replace the filter. If the suction power
decreases, press the dust tank release button. Keep the aluminium nozzle end covered during
self-cleaning.
After using the device, unplug it and disassemble it.

5. CLEANING AND MAINTENANCE

Disconnect the appliance from the power supply and allow it to cool down before cleaning.
Use a soft, damp cloth to clean the device's surface.
Do not immerse the appliance in water or other liquid.
Do not use abrasive cleaners or scouring pads to clean the product.
Take the dust tank out.
Remove the high-efficiency filter.
Empty the dust tank.
Clean the high-efficiency filter and the fabrics filter with water and dry them.
Assemble all the components back in place.
33
CONGA POPSTAR 15300 ASH STEEL