Parts And Components; Before Use - cecotec CONGA POPSTAR 4070 H20 MAX Manual De Instrucciones

ENGLISH

1. PARTS AND COMPONENTS

Fig. 1
1. Upright vacuum cleaner power switch
2. Suction power level button
3. Handheld vacuum cleaner release button
4. Handheld vacuum cleaner power button
5. Dust tank release button
6. Battery
7. Handheld vacuum cleaner body
8. High-efficiency filter
9. Filter holder
10. Dust tank
11. Wide 2-in-1 accesory for furniture and corners
12. Battery charger
13. Main brush
14. Water tank cover
15. Water tank
16. Mop

2. BEFORE USE

Take the product out of the box and remove all packaging material, stickers or labels.
Make sure all the parts and accessories are present and that there are no visible signs of
damage. If there are, contact immediately the Technical Support Service of Cecotec.
Assemble the product by attaching the handle to the device:
Use the provided screw.
Fig. 2
Connect the charger to the power supply and to the device's socket. Before connecting it,make
sure the device is turned off. The indicators will light up indicating it is on.
Fig. 3
Allow the device to charge for 5 hours before the first use.
Note:
When the device is completely discharged, it will require 5 charging hours in order to fully
charge the battery again.
Leave the device on the charging base while it is not being used to ensure it is always charged
when it is going to be used.
24