GE Profile HGE6030DI Manual De Uso página 31

Instructions for
Use
Setting the Time
Oven Light
Setting Display
Contrast
The oven has two lateral keypads with touch controls. To activate
the various functions, it is sufficient to place a finger on the various
symbols without pressing being necessary.
In the central part there is the display of the various functions,
programmes, timing etc.
Once the oven has been connected to the mains supply, the
display shows the time.
To set the clock at the current time:
· Touch the symbol
flash. Set using the symbols "+" and "-" .
· Touch the symbol
Set using the symbols "+" and "-".
· Touch the symbol
not pressed for twenty seconds, the time setting mode is exited.
The oven light goes on by touching the symbol
any other button. To switch it off, touch the button or, otherwise, it
automatically switches off after about 30 seconds.
According to the visual angle and your personal requirements, the
contrast of the display can be adjusted as follows:
· Touch the symbols "+" and "-" at the same time for  seconds.
The display shows all the symbols.
· Touch "+" or "-" to increase or decrease the contrast.
· When you find the contrast you prefer, wait for the current time
to return for automatic memorization.
This adjustment is not possible when programmes are set or when
END appears on the display.
for about  seconds until the hour numbers
again, and the minutes numbers will flash.
again to confirm the time. If the buttons are
or by touching
3