Adjust The Distance Between The Handbike Batec Electric And The Chair; Adjust Stem Angle; Adjust Stem Height; Lcd Console Adjustments - BATEC MINI 2 Manual De Usuario

– Adjusting the distance between the HANDBIKE BATEC ELECTRIC
and the wheelchair.
– Adjusting the angle of the stem on the HANDBIKE BATEC ELECTRIC.
– Adjusting the height of the handlebar on the HANDBIKE BATEC
ELECTRIC.
5.2.1. ADJUST THE DISTANCE BETWEEN THE HANDBIKE BATEC ELECTRIC
AND THE CHAIR
ith the HANDBIKE BATEC ELECTRIC anchored, adjust the distance
between the HANDBIKE BATEC ELECTRIC and the wheelchair so that
there is as little space as possible between the user's feet and the
stand frame, using the telescopic anchoring bar and the scre s indi-
cated. If the user doesn t have any other preference or limitations, e
recommend a distance of cm.
( ee fig. 48)
5.2.2. ADJUST STEM ANGLE (EXCEPT MINI 2 MODEL)
ith the HANDBIKE BATEC ELECTRIC anchored, adjust the angle of
the stem on the HANDBIKE BATEC ELECTRIC in order to fit the han-
dlebar to the user s arm length, using the scre s indicated. The up-
per and lo er scre s must be set on the same number. If the user
doesn t have any other preference or limitations, e recommend po-
sition 3.
( ee fig. 49)

5.2.3. ADJUST STEM HEIGHT

ith the HANDBIKE BATEC ELECTRIC anchored, adjust the stem
height on the HANDBIKE BATEC ELECTRIC with the Quick Release le-
ver.
( ee fig. 50)
CAREFUL
Do not fit over the MA mar on the stem.
– 40 –

5.2.4. LCD CONSOLE ADJUSTMENTS

1. S itch on the battery to see the INFORMATION SCREEN.
2. Press M (mode) button to move bet een all functions in loop se-
quence from one function screen to another as CLOCK / ODO
(odometer) RT (partial time) / TT (total time) AVG (average speed)
/ MA (maximum speed) TRIP 1 / ODO TRIP 2 / ODO.
– Press R (reset) button for 2 seconds to reset TRIP 2, AVG and MA
from stored values to zero individually.
– Data of TRIP 1, AVG and RT can be reset at the same time hen
one of the three data functions is being reset.
– ODO, CLOCK and TT data cannot be reset.
. Press M and R buttons simultaneously for 2 seconds to display the
SETTING SCREEN 1.
( ee fig. 53)
. Press M button to move bet een all functions in loop sequence
from one function screen to another as 12/2 hour, cloc , circum-
ference heel number and Km/h or MPH.
– Press R button to increment the flashing digit by 1 or convert units.
– Press M button to confirm the digit setting and jump to next digit
or next setting screen to be set.
– The c (circumference number) values are those:
HANDBIKE BATEC ELECTRIC Mini 2: 947
HANDBIKE BATEC ELECTRIC Electric 2: 1445
HANDBIKE BATEC ELECTRIC Scrambler 2: 1621
– Press M for 2 seconds at any setting screen to finish the setting
and go to INFORMATION SCREEN
. On SETTING SCREEN 1 (step ) pressing M and R buttons simulta-
neously for 2 seconds ill display the SETTING SCREEN 2.
– Battery voltage value is on the bottom and manufacturer fine ad-
justment battery value is on top.
6. To return to INFORMATION SCREEN and fix all settings press M but-
– 41 –
( ee fig. 51)
( ee fig. 52)
( ee fig. 54)