Battery; Basic Battery Use - BATEC MINI 2 Manual De Usuario

– S itch the device o ith the ey.
– To move for ards or bac ards, use the rims on the
to move the HANDBIKE BATEC ELECTRIC and
desired direction.
– To turn, turn the HANDBIKE BATEC ELECTRIC with one hand while
propelling the wheelchair with the other.
– To stop, use the HANDBIKE BATEC ELECTRIC bra es or the rim on
the wheelchair.
• Lights: There is a button on the HANDBIKE BATEC ELECTRIC handlebar
to s itch on the front and rear lights.
front light ill go on in normal mode and the light indicator on the dis-
play panel ill turn green. hen you push the front light button again,
it changes to high beam mode, and so on. To turn o the lights, hold
the button down for 2 seconds. The front light is below the battery and
the t o rear lights, on either side of the stand frame.
ANTI SLIP SYSTEM
To activate the Anti-Slip System:
This is only possible if the HANDBIKE BATEC ELECTRIC is stopped and
the throttle not engaged (see Fig.
• Press the Front gear button ( ) for
– The light indicator (1) (2) ( ) on the display panel ill blin .
– The Anti Slip System is no active.
hen the Anti Slip System is active for 2 seconds, it stops the HAND-
BIKE BATEC ELECTRIC from sliding bac on a hill and eeps the heel
from sliding hen starting.
Deactivate the Anti-Slip System:
This is only possible if the HANDBIKE BATEC ELECTRIC is stopped and
the throttle not engaged.
– 30 –
heelchair
heelchair in the
hen you push the button, the
( ee fig. 36a, 36b, 36c)
).
seconds.
– Press the Front gear button ( ) for
– The light indicator (1) (2) ( ) on the display panel lights up.
The Anti Slip System is no longer active.
ith the Anti Slip System deactivated, the HANDBIKE BATEC ELECTRIC
ill once again behave as normal.
The Anti Slip System comes standard on the SCRAMBLER 2 model. For
other models, please chec .

4.9. BATTERY

BATEC MOBILITY has several 6 V lithium ion batteries: 2 0
22 h, and 1 V 6 h lithium ion battery. Each ithout memory
e ect and ith a cable free connection system.
THE 2 0 H BATTERY COMPLIES
travel ith batteries in mobility aid devices.
Lithium ion batteries have many advantages over other batter-
ies, mainly due to their flexibility. They don t have to be completely
charged every time they are used, nor do they have to be used con-
tinuously or fully drained each time.
BATEC MOBILITY only uses batteries ith the safest technology availa-
ble, including the BMS smart battery management system.
HANDBIKE BATEC ELECTRIC batteries don t require any maintenance.

4.9.1 BASIC BATTERY USE

Inserting and removing t e HANDBIKE BATEC ELECTRIC battery
You don t need to touch any connectors to insert or remove the bat-
tery from your HANDBIKE BATEC ELECTRIC, as this is done automat-
ically.
( ee fig. 38)
• To remove the battery: Turn the ey to the REMOVE BATTERY position
(OPEN). Grab the handle of the battery and pull up gently until the bat-
tery comes fully of the guide.
( ee fig. 39)
– 31 –
seconds.
h and
ITH IATA DGR REGULATIONS for air
( ee fig. 37)