Installation And Adjustments; Installation Of The Handbike Batec Electric On Awheelchair; User Adjustments - BATEC MINI 2 Manual De Usuario

4.9.6. SPECIFICATIONS OF THE 679 WH BATTERY
• Dimensions: 0 x 1 0 x 60 mm
• eight: .6 g
• Po er: 6 h
• Battery: Panasonic PF 2.9 Ah
• Nominal voltage: 6. V
• Nominal charge: 1 . Ah
• Maximum discharge current: 2 A
• Maximum charge current: A
• Battery range by model HANDBIKE BATEC ELECTRIC SCRAMBLER 2 /
RAPID 2: 0 m
* Battery range calculated under the following conditions: 75-kg user, extra-light wheel-
c ai a e ain n in an ea
pending on the battery.
4.10. WEIGHTS
Some HANDBIKE BATEC ELECTRIC models are equipped
ard eights to improve traction. The eights are located on the for ,
one on each side. They each eigh 2.
port the HANDBIKE BATEC ELECTRIC, the eights can be removed.
• To remove the eights:
1) Hold the eight ith one hand, press on the red button, tilting
it so the bottom part comes a ay from the HANDBIKE BATEC
ELECTRIC.
( ee fig. 44)
2) Remove the eight.
( ee fig. 45)
• To insert the weights:
1) Hold the eight ith one hand. Tilt it slightly and insert the t o
tabs into the eight mount slot.
2) Push the bottom of the eight in ard until it clic s into place.
( ee fig. 47)
– 38 –
ee m an e ma a e-
ith stand-
g. To ma e it easier to trans-
( ee fig. 46)

5. INSTALLATION AND ADJUSTMENTS

5.1. INSTALLATION OF THE HANDBIKE BATEC ELECTRIC ON A
WHEELCHAIR
To anchor a HANDBIKE BATEC ELECTRIC to a
first install a BATEC DOCKING BAR (pat. pending). The BATEC DOCK-
ING BAR can be installed on most heelchairs on the mar et, hether
fixed or folding frame.
IMPORTANT!
An updated list of heelchairs compatible ith the HANDBIKE BATEC
ELECTRIC is available in the support section of the BATEC MOBILITY
website.
The HANDBIKE BATEC ELECTRIC must be installed on a heelchair by
a qualified professional authorised by BATEC MOBILITY. Contact BATEC
MOBILITY to find the authorised installation professional closest to you.

5.2. USER ADJUSTMENTS

Once the HANDBIKE BATEC ELECTRIC is properly installed on the wheel-
chair, there are several adjustments that must be made in order to fit
the HANDBIKE BATEC ELECTRIC to the user s level of mobility, type of
disability and size.
These adjustments can be done easily ith the tools and instructions
provided ith the HANDBIKE BATEC ELECTRIC and basic mechanical
knowledge.
The follo ing adjustments can be made:
– 39 –
heelchair, you must