Installing The Siren; Auxiliary Relay - Nice Infinity Shock G2 Instrucciones Y Advertencias Para La Instalación Y El Uso

13

INSTALLING THE SIREN

Follow the connection schemes below to install 1 or 2 sirens.
The example below
shows the connection of
a single siren.
Electrifier connectors
S
14

AUXILIARY RELAY

The auxiliary relay is activated whenever the system is triggered and its
activation time is the same time set up to trigger the siren. However,
this relay does not generate an enable or disable beep, i.e. it is ideal to
interconnect the electrifier with the monitored centrals. It may also be
used to trigger the sirens in places where the enable/disable beep cannot
be used.
Note in the example below that the Relay will work as a switch, switching
the power grid and activating the installed load, which, in the case below
is a light bulb, but could be any other device. In order to connect 12V
devices such as sirens, just use a 12V source instead of the conventional
power grid.
Red wire
Siren
Black wire
The example below shows
the connection of 2 sirens.
Electrifier connectors
S
Black wire
Siren1
Red wire
WARNING:
use at max o two piezoelectric 115 dB
sirens.
Siren2
53
ENGLISH_