Start-Up; Use; Care And Storage; In The Event Of Problems - Beurer MG 55 Instrucciones Para El Uso

7. Start-up

• Remove the packaging.
• Check the device, power supply and cables for damage.
• Connect the device to the mains power supply. The device must be switched off.
• Route the cable safely so that there is no risk of anyone tripping over it.

8. Use

Make sure that the device is switched off before inserting the power cable. Switch on the device by rotating
the controller clockwise past the detent.
Set the desired massage speed using the control.
Heat function
The can be switched on using the "Heat" button.
Replace the massage attachments by rotating the attachment on the product in an anti-clockwise direction
and replacing. Fix the newly positioned massage attachment in place by rotating it in a clockwise direction.
Guide the device with both hands to the area of the body to be massaged. You can stand, sit or lie down
and can massage yourself or another person. The massage intensity can be altered by pressing more or less
firmly with the massage device. Do not massage a certain site of the body for longer than 3 minutes and
then change to other area of the body.
Note
Do not use the massage device just before going to bed. The massage can also have a stimulating
effect and may cause difficulties in getting off to sleep.
WARNING
• The massage must be pleasant and relaxing at all times. Stop the massage or change the position
of the massage device if you find it is painful or unpleasant.
• Do not jam or force any part of your body, in particular your fingers, into the area of the massage
head.

9. Care and storage

Cleaning
First unplug the device and allow it to cool off. Then you can clean it with a cloth which is no more than lightly
moistened. You can also use a mild detergent.
WARNING
• Disconnect the device before cleaning it.
• Only clean the appliance in the manner specified. Fluid must never be allowed to enter into the
device or accessories.
• Do not use the device again until it is completely dry.
Storage
Keep the massage device in a cool and dry place where it is out of the reach of children. We recommend
storing the device in its original packaging.

10. In the event of problems?

Problem
Massage head does
not move.
Cause
Appliance not connected
to the power supply.
Device does not move.
Overheating protection
tripped.
Remedy
Connect the plug to the mains supply and
switch on the appliance.
Switch on the appliance.
Disconnect device from mains power, wait at
least 15 minutes, plug in again and switch on.
13