Appliance Description; Start-Up; Operation - Beurer MG 55 Instrucciones Para El Uso

Disposal
cAutION
Please dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and
Electronic Equipment).
If you have any queries, please contact the appropriate local authorities.

4. Appliance description

2
1
5

5. start-up

• Remove the packaging.
• Check the device, power supply and cables for damage.
• Connect the device to the mains power supply. The device must be switched off.
• Route the cable safely so that there is no risk of anyone tripping over it.

6. Operation

Make sure that the device is switched off before inserting the power cable. Switch on the device by rotating
the controller clockwise past the detent.
Set the desired massage speed using the control. The
button. Replace the massage attachments by rotating the attachment on the product in an anti-clockwise
direction and replacing. Fix the newly positioned massage attachment in place by rotating it in a clockwise
direction. Guide the device with both hands to the area of the body to be massaged. You can stand, sit or lie
down and can massage yourself or another person. The massage intensity can be altered by pressing more
or less firmly with the massage device. Do not massage a certain site of the body for longer than 3 minutes
and then change to other area of the body.
Note
Do not use the massage device just before going to bed. The massage can also have a stimulating
effect and may cause difficulties in getting off to sleep.
WARNING
• The massage must be pleasant and relaxing at all times. Stop the massage or change the position
of the massage device if you find it is painful or unpleasant.
• Do not jam or force any part of your body, in particular your fingers, into the area of the massage
head.
4
3
1. Massage head
2. Heat function
3. On-Off switch; control
(infinitely adjustable massage intensity)
4. Heat function
Infrared heating
5. Interchangeable massage attachments
Heat function
can be switched on using the "Heat"
10