Battery Operation; Battery Life; Battery Charging; Charging Pb Battery - Mettler Toledo PJA434 Manual De Usuario

Cleaning Instructions
Remove dirt and deposits at regular intervals from the outside and inside of the scale.
The procedure depends both on the type of surface and on the environmental conditions prevailing at the
installation location.

6.3 Battery Operation

Check the battery before operation. Recharge the battery according to [Battery Charging Page 12] when the
battery level is low.
Please refer to the weighing terminal manual for further explanation on battery level indication.
This unit is delivered with one of the following battery configurations.
Pb Battery 7Ah
NiMH Battery
The voltage level of the battery is shown in the weighing terminal. When the battery indication only shows one
bar, the battery should be charged. When the battery is completely empty, the weighing system switches off.

6.3.1 Battery Life

Refer to [Specifications Page 4] for battery life of the unit.

6.3.2 Battery Charging

In order to maximum the lifetime of the battery, follow the charging instructions below precisely. Follow the
charging hours as stated in [Specifications Page 4].

6.3.2.1 Charging Pb Battery

The Pb battery can be charged through the interface on the
battery case. The adapter is supplied with country-specific
plugs. Choose the appropriate one to charge.

6.3.2.2 Charging NiMH Battery

Remove the NiMH battery banks from the battery case and
use the charging station to recharge the battery.

6.3.3 Battery Disposal

As a result of normal use over a period of time, the available power in the battery pack will be reduced and it
will lose its ability to power the terminal for an extended time. When this occurs, the battery pack should be
replaced and the original battery must be disposed of properly.
12 Maintenance and Service​ ​
ICS439 ICS469
Yes Yes
Yes Yes
WARNING
Always recharge both battery banks at the same time!
ICS689 ICS689 wifi
Yes Yes
Yes Yes
Pallet Truck Scale