At The Md 100 And Md 200 - Lovibond Tintometer MD 100 Instrucciones

Menu options
GB
Store Date
Prt
1
Time Cal
!
PrtG
Mode
On
Off
E 162
MD1X0/200_1b 9b/2020
Prt – Transmitting stored data
1
- to Printer or PC

- at the MD 100 and MD 200

Attention: To print data, or to transmit to a PC, the optional IRiM
(Infrared Interface Module) is required. It can be used in combination
with the devices MD 100 and MD 200.
notch for IR data transfer
Retrieve menu (see "Retrieve menu")
press
The IRiM Module and the connected printer/PC must be ready. The
instrument displays "PrtG" (Printing) for approx. 1 second.
press
All data sets will be transmitted one after the other. After finishing
the instrument switches to test mode.
The print job can be cancelled by pressing the [On/Off] key. The
instrument switches off.
If the instrument is not able to communicate with the IRiM, a timeout
occurs after approx. 2 minutes. The error E 132 is displayed for approx.
4 seconds. Subsequently, the instrument switches to test mode (see
also IRiM manual).
37