Technical Data - Lovibond Tintometer MD 100 Instrucciones

Technical Data

GB
Instrument
Light source
Photometric Range
Wavelength accuracy ± 1 nm
Photometric accuracy*
Photometric resolution
Auto-OFF
Display
Time
Calibration
Ambient conditions
Waterproof
CE
*measured with standard solutions
MD1X0/200_1b 9b/2020
Technical Data MD 100, MD 110, MD 200
automatic wavelength selection,
direct reading colorimeter
LEDs, interference filters (IF) and photosensor in transparent
cell chamber
Wavelength specifications of the interference filter depen-
dent on the device variant, max. 3 wave lengths Possible
built-in wavelengths:
430 nm
530 nm
560 nm
580 nm
610 nm
660 nm
-2600 - 2600 mAbs
3 % FS (T = 20 °C – 25 °C)
0,01 A
automatic switch off
10 respectively 25 minutes after last keypress
(different reaction times depending on available method)
backlit LCD (on keypress)
real time clock und date
user and factory calibration
resetting to factory calibration possible
temperature: 5– 40 °C
rel. humidity: 30 –90 % (non-condensing)
floating; as defined in IP 68 (1 hour at 0.1 meter)
Certificate for Declaration of CE-Conformity
at www.lovibond.com
To ensure maximum accuracy of test results, always use the reagent
systems supplied by the instrument manufacturer..
= 5 nm
= 5 nm
= 5 nm
= 5 nm
= 6 nm
= 5 nm
47