Aqua Medic EcoDrift 4.0 Manual Del Usuario página 9

Note: Even though the pump comes with a strong magnet holder that holds the pump securely in
place, we recommend to place the pump away from expensive animals in case it becomes dislodged
from the aquarium glass.
Note: Avoid operating the pump via a timer. Small animals could enter the pump while it is shut-
off, and could cause damage to the pump and animals when starting.
Safety Instructions
6. EcoDrift Control
The pump is built for indoor aquarium use only.
Zur Erzeugung unregelmäßiger Strömungen wird der Steuerungscomputer zwischen Netzteil und
Do not alter or change any of the electrical components such as cables or plugs, as it voids the
Pumpe geschaltet.
warranty. If any of the power cables are damaged, the pump must be destroyed.
4. EcoDrift Control
To produce irregular flows, the EcoDrift Control is switched between power supply and pump.
EcoDrift Control allows the EcoDrift pump to operate in a variety of different modes by simply
selecting any of the pre-set programs listed below.
not be used for controlling the larger types. Furthermore, it has not a port for a light
sensor.
Fig. 2: EcoDrift Control
1. Power input
2. Light sensor input (at the side) (apart from EcoDrift 4.0)
3. Pump connection
4. Control dial
Programs: (Press the MODE button to access the various programs)
P100: Continuous flow rate at 100 %.
P75: Continuous flow rate at 75 %.
P50: Continuous flow rate at 50 %.
The EcoDrift Control
The
4.0 is smaller and can
9