Thank You For Choosing Kohler Company; Tools And Materials; Before You Begin - Kohler K-1030-H2 Guia De Instalacion

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Thank You For Choosing Kohler Company

We appreciate your commitment to Kohler quality. Please take a few minutes to review this manual before
you start installation. If you encounter any installation or performance problems, please don't hesitate to
contact us. Our phone numbers and website are listed on the back cover. Thanks again for choosing Kohler
Company.

Tools and Materials

Silicone
Measuring
Sealant
Tape
Masking
Shims
Tape

Before You Begin

IMPORTANT! The hydro-massage system is intended for indoor use only.
IMPORTANT! The stud supports must be within 3/8" (1cm) of plumb. The door enclosure is designed to
fit the footbath. Proper door assembly and operation depends upon installation of the footbath against
square and plumb studding.
The hydro-massage system operates at flow rates up to 80 gallons (302 L) per minute. To achieve a
watertight installation, it is critical that you follow all the installation instructions carefully. Pay
particular attention to leveling and sealing details to obtain a satisfactory installation.
It is critical that you follow the installation sequence and details in the steps that follow to
successfully install and operate your system, and to prevent costly repairs and rework.
Kohler Co. shall not be responsible for leakage that occurs as a result of inadequate or poor
assembly or installation techniques.
All information in this manual is based on the latest product information available at the time of
publication. At Kohler, we constantly strive to improve the quality of our products. We reserve the
right to make changes in product characteristics, packaging or availability at any time without
notice.
1032120-2-C
Safety
Glasses
Level
Claw
Hammer
4
Plus:
• Conventional Woodworking
Tools and Materials
• Plumbing Tools and
Drill Bits
Equipment
• Drop Cloth
• 2 x 4's or 2 x 6's
• Plywood
• Cement Board
• Solvent Welding Solution
• Pencil
1-5/8" Carbide
Hole Saw
Kohler Co.
Tabla de contenido
loading

Este manual también es adecuado para:

K-1035-h2K-1036-h2K-5161

Tabla de contenido